Philips D6350 Extended User Documentation Download Page 9

Page: 9 / 46

3 Get started

Caution

•

Make sure that you have read the safety instructions in

the 'Important safety instructions' section before you

connect and install your handset.

Connect the charger

Warning

•

Risk of product damage! Ensure that the power supply

voltage corresponds to the voltage printed on the back

or the underside of the phone.

•

Use only the supplied power adapter to charge the

batteries.

Note

•

If you subscribe to the digital subscriber line (DSL) high

speed internet service through your telephone line,

ensure you install a DSL filter between the telephone

line cord and the power socket. The filter prevents

noise and caller ID problems caused by the DSL

interference. For more information on the DSL filters,

contact your DSL service provider.

•

The type plate is located on the bottom of the charger.

Connect each end of the power adapter to (for

multi handset version only):

• the DC input jack at the bottom of the

extra handset charger.

• the power socket on the wall.

Install the supplied batteries

Summary of Contents for D6350















































Search results

Summary of Contents for D6350

Reviews:

Related manuals for D6350

Brands by name

Popular brands

Philips D6350, Extended User Documentation

Search results

Summary of Contents for D6350

Reviews:

Related manuals for D6350

Brands by name

Popular brands