24
EN
13 Phone settings
You can customize the settings to make it your
own phone.
Make sure that all the handsets registered to
the base station are
Philips D63
models in
order to have this feature functioning properly.
Display settings
You can change the display of the phone during
standby mode.
Set the brightness
You can set the brightness of the handset
screen to different levels.
1
Select
[Menu]
.
2
Press / to select , then press
[Select]
.
3
Select
[Display]
>
[Brightness]
, then press
[OK]
to confirm.
4
Select an option, then press
[OK]
to
confirm.
Set the backlight of the LCD screen
You can set the backlight of the LCD screen
and keypad flashing on or off when the phone
rings.
1
Select
[Menu]
.
2
Press / to select , then press
[Select]
.
3
Select
[Display]
>
[Visual alert]
, then press
[OK]
to confirm.
4
Select
[Flashing on]
/
[Flashing off]
, then
press
[OK]
to confirm.
»
The setting is saved.
Eco mode
The
Eco
mode reduces the transmission power
of the handset and base station when you are
on a call or when the phone is in standby mode.
1
Select
[Menu]
.
2
Press / to select , then press
[Select]
.
3
Select
[Eco mode]
, then press
[OK]
to
confirm.
4
Select
[On]
/
[Off]
, and press
[OK]
to
confirm.
»
The setting is saved.
»
is displayed in standby mode.
Note
•
When
ECO
mode is set to
[On]
, the connection
range between the handset and the base station can
be reduced.
ECO+ mode
When the
ECO+
mode is activated, it
eliminates the transmission power of the
handset and base station in standby mode.
1
Select
[Menu]
.
2
Press / to select , then press
[Select]
.
3
Select
[ECO+ mode]
, then press
[OK]
to
confirm.
4
Select
[On]
/
[Off]
, and press
[OK]
to
confirm.
»
The setting is saved.
Note
•
Make sure that all the handsets registered to the base
station are D6350 in order to have the
ECO+
feature
functioning properly.
•
When
ECO+
is activated, the standby time is reduced.
This is because in
ECO+
mode the base station is not
transmitting any signal in standby mode; therefore the
handset needs to “listen” more frequently for signals
from the base station to detect incoming calls or other
requests from the base station. The time it takes for the
handset to access features like call setup, call log, paging,
and phonebook browsing is also delayed. The handset
will not alert you to link loss in case of power loss or
moving out of range.
Summary of Contents for D6350
Page 2: ......
Page 45: ...43 EN two calls call on hold 14 V volume adjustment 14 ...
