36
EN
Tip
•
When you access the answering machine remotely,
you are recommended to set the ring delay to
[Toll
saver]
mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN/passcode.
Note
•
The remote access PIN/passcode is the same as your
system PIN/passcode. The preset PIN/passcode is 0000.
Change the PIN/passcode
1
Select
[Menu]
> >
[Remote access]
>
[Change PIN]
, then press
[OK]
to confirm.
2
Enter the old PIN/passcode, then press
[OK]
to confirm.
3
Enter the new PIN/passcode, then press
[OK]
to confirm.
4
Enter the new PIN/passcode again, then
press
[Save]
to confirm.
»
The setting is saved.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Select
[Menu]
> >
[Remote access]
,
then press
[OK]
to confirm.
2
Select
[Activate]
/
[Deactivate]
, then press
[OK]
to confirm.
»
The setting is saved.
Access the answering machine remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter
#
when you hear the announcement.
3
Enter your PIN/passcode.
»
You now have access to your
answering machine, and you can listen
to the new messages.
Note
•
You have 2 chances to enter the correct PIN/passcode
before your phone hangs up.
4
Press a key to carry out a function. See the
Remote access commands table below for
a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1
Repeat the current or listen to the
previous message.
2
Listen to messages.
3
Skip to the next message.
6
Delete the current message.
7
Switch the answering machine on.
(not available when you listen to the
messages).
8
Stop listening to the message.
9
Switch the answering machine off.
(not available when you listen to the
messages).
Behavior of the LED display on the
base station
The table below shows you the current status
with different LED display behavior on the base
station.
LED
display
Answering
machine
status
Message status
Summary of Contents for D600
Page 2: ......
