Philips ColorBlaze TRX Manual Download Page 39

Page: 39 / 40

ColorBlaze

TRX Product

Guide

1. Connect QuickPlay Pro to your lighting network, and discover the ColorBlaze

TRX fixture you want to configure, as described in the preceding procedure.

2. On the ColorBlaze TRX tab on QuickPlay Pro, click Parameters.

3. Set effect parameters:

▪

For Fixed Color, select a brightness for each channel (0 – 255).

▪

For Color Wash, set cycle speed (1 second – 1 hour), direction (forward or

reverse), saturation (0% – 100%), and brightness (0% – 100%).

▪

For Chasing Rainbow, set cycle speed (1 second – 1 hour), direction (forward

or reverse), saturation (0% – 100%), width (1 – 170 pixels) and brightness (0% –

100%).

4. To apply the selected settings to all discovered ColorBlaze TRX fixtures, click the

Program All ColorBlaze TRX checkbox.

5. When you're ready, click Program to apply all changes.
6. Click the window's close box.

Updating ColorBlaze TRX Firmware

The ColorBlaze TRX firmware image is periodically updated to improve system

performance and functionality. To maximize system performance, make sure your

ColorBlaze TRX fixtures are running the most recent version of the firmware.

Download ColorBlaze TRX Firmware

If a more recent version of the ColorBlaze TRX firmware is available, download the

firmware file (.hex extension):
1. Visit the Firmware Updates page at www.philipscolorkinetics.com/support/

downloads/firmware/ to check for the latest firmware version.

2. If a newer firmware image is available, click the link on the Firmware Updates page

to download the firmware file to an accessible location on your computer.

Download CK Firmware Updater

To update the firmware image on a ColorBlaze TRX fixture, you must download and

install the CK Firmware Updater application on your computer.
1. Visit the Firmware Updates page at www.philipscolorkinetics.com/support/

downloads/firmware/

2. Download the Firmware Updater Utility.
3. Decompress the file to an accessible location on your computer and open it.

4. Run the installer, and follow the on-screen instructions.

Summary of Contents for ColorBlaze TRX









































Search results

Summary of Contents for ColorBlaze TRX

Reviews:

Related manuals for ColorBlaze TRX

Brands by name

Popular brands

Philips ColorBlaze TRX, Manual

Search results

Summary of Contents for ColorBlaze TRX

Reviews:

Related manuals for ColorBlaze TRX

Brands by name

Popular brands