9
4
Connect wires (see “Connect wires”
section).
5
Slide the unit into the dashboard until a
click sound is heard.
6
Fix the unit onto the dashboard with
screws.
7
Reconnect the negative terminal of the
car battery.
Connect wires
Caution
Ensure that all loose leads are insulated with
•
electrical tape.
Note on the power supply lead (yellow)
When you connect other devices to this
•
system, ensure that the rating of the car
circuit is higher than the total fuse value
of all the connected devices.
Notes on speaker connection
Never connect speaker wires to the metal
•
body or chassis of the car.
Never connect speaker wires with stripes
•
to one another.
Mount in the dashboard
Note
Check wire connection before you mount the
•
unit into a car.
If preset radio stations are lost when the ignition
•
key is turned OFF and then back ON, reconnect
the red leads crosswise to the yellow ones.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
If you disconnect the car battery in
•
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
If the car battery is not disconnected,
•
to avoid short-circuit, ensure that
bare wires do not touch each other.
2
Take out the original car audio and keep
the screws.
3
Take off the mounting brackets from the
original car audio and mount them onto
this car audio system.
English
EN
