17
EN
Set up for weak reception
When the current reception gets poor, the
product can automatically switch the source or
mute the speakers according to your setup.
1
Press and hold to access the system
menu.
»
[DAB SCAN]
is displayed.
2
Press / repeatedly until
[DAB
WEAK]
scrolls.
3
Rotate
to select an option, and then
press
to confirm.
•
[WEAK MUTE]
: Mute the speakers
•
[WEAK TO FM]
: Switch the source
to an FM radio station with strong
reception that broadcasts the same
program
Use the DRC (Dynamic
Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
Press and hold to access the system menu.
»
[DAB SCAN]
is displayed.
2
Press / repeatedly until one of the
following options is displayed.
•
[DRC OFF]
: No compensation applied.
•
[DRC LOW]
: Medium compensation
applied.
•
[DRC HIGH]
: Maximum
compensation applied.
3
Rotate
to select an option.
Disable the DAB reception
1
Press and hold to access the system
menu.
»
[DAB SCAN]
is displayed.
2
Press / repeatedly until
[ANTENNA OFF]
or
[ANTENNA 12V]
is displayed.
3
Rotate
to select an option, and then
press
to confirm.
•
[ANTENNA OFF]
: Disable the DAB
reception.
•
[ANTENNA 12V]
: Enable the DAB
reception.
Reset the DAB tuner
1
Press and hold to access the system
menu.
»
[DAB SCAN]
is displayed.
2
Press / repeatedly until
[DAB RESET]
is displayed.
•
To clear the list of detected and
programmed stations, press
to
confirm.
•
To exit the system menu, press .
Remove invalid stations
1
Press and hold to access the system
menu.
»
[DAB SCAN]
is displayed.
2
Press / repeatedly until
[PRUNE]
is
displayed.
•
To remove invalid stations from the list
of scanned stations, press
.
•
To exit the system menu, press .
Check the current version of
DAB firmware
1
Press and hold to access the system
menu.
»
[DAB SCAN]
is displayed.
2
Press / repeatedly until
[SW VERSION]
is displayed, and then
press
.
»
The current version of DAB firmware
is displayed.
