27
EN
Note
•
If you pick up the phone when the caller leaves a
message, the recording stops and you can talk to the
caller directly.
Note
•
If the memory is full, the answering machine switches to
[ANSWER ONLY]
automatically. Delete old messages
to receive new ones.
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
From the base
• To start/Stop listening, press
.
•
To adjust the volume, press / .
• To play the previous message/replay the
current message, press
.
• To play the next message, press
.
• To delete the current message, press
.
Note
•
No deleted messages can be recovered.
Delete an incoming message
From the base
Press when you listen to the message.
»
The current message is deleted.
Delete all old incoming messages
Press and hold
on the base station in standby
mode.
»
All old messages are permanently
deleted.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1
Press
MENU/OK
.
2
Select
[ANSW MACHINE]
>
[RING
DELAY]
, then press
MENU/OK
to confirm.
3
Select a new setting, then press
MENU/
OK
to confirm.
»
The setting is saved.
Note
•
Make sure that the answering machine is switched on
before this feature can be applied.
Tip
•
When you access the answering machine remotely,
you are recommended to set the ring delay to
[TOLL
SAVER]
mode. This is a cost effective way to manage
your messages. When there are new messages, the
answering machine picks up the call after 3 rings; When
there is no messages, it picks up the call after 5 rings.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
•
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
