Philips Brilliance 190SW9FB/27, Servise Manual

Page: 80 / 90

HUDSON 9
80
3.15.1.6 Linkage between Smart Image OSD and main OSD
A. Settings within main OSD have linkage with Smart Image OSD.
i. Brightness
ii. Contrast
iii. Color Temperature
B. Because each preset profiles will define default setting of these 3 parameters. Users can understand what is
the value of that in preset profile by open the main OSD.
C. When any Smart Image profile had been enabled. The parameters in main OSD are still available for user to
adjust. But these adjustments are temporary only. If users switch to another profile and then go back. The
setting in main OSD will show preset values of that Smart Image profile enabled.
3.15.1.7 Profile Definitions (system integrators to input at design stages)
A. Office Work
I
．
Purpose: Design for general office application, like word processing, Spreadsheet and email. The
screen is dominated by text.
II ． Enhancement point:
1. A little sharpness for increasing the details of e.g. an excel grid. No other type of enhancement as it
won't bring value.
2. Color temperature remains in 6500°K.
3. Brightness level should be 70%
4. Smart Response set to “Off”
5. Smart Contrast set to “Off”
B. Image Viewing
i. Purpose: Design for image viewing application, especially in slide show. The screen is dominated by
picture. PowerPoint presentation could use this profile also.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC) should be implemented.
2. Sharpness and color to be enhanced 75%.
3. Color temperature 6500°K (or even 5500°K, but it should be checked against the light output)
4. Brightness level sets to maximum.
5. Smart Response set to “Off”.
6. Smart Contrast set to “Off”.
C. Entertainment
i. Purpose: Design for video application, Like Microsoft Media Player or Real Player. The screen is
dominated by video.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC) should be implemented.
2. Sharpness enhanced 90%.
3. Color enhancement set as the same with Video.
4. Color temperature set to7500K
5. Brightness level sets to maximum.
6. Smart Response set to “On”
7. Gamma Table turns off to achieve fastest response time.
8. Smart Contrast set to “On”