Philips Brilliance 190SW9FB/27 Servise Manual Download Page 8

Page: 8 / 90

HUDSON 9

3.3 Adjusting the Picture

Description of the On Screen Display

On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or

select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display

interface is shown as below:

In the OSD shown above users can press buttons at the front bezel of the monitor to move the cursor, to confirm the

choice or change.

To Lock/Unlock OSD function (User Mode)

The OSD function can be locked by pressing “MENU” button for more than 10 seconds.

Locked OSD function can be released by pressing “MENU” button for more than 10 seconds again.

Summary of Contents for Brilliance 190SW9FB/27



























































































Search results

Summary of Contents for Brilliance 190SW9FB/27

Reviews:

Related manuals for Brilliance 190SW9FB/27

Brands by name

Popular brands

Philips Brilliance 190SW9FB/27, Servise Manual

Search results

Summary of Contents for Brilliance 190SW9FB/27

Reviews:

Related manuals for Brilliance 190SW9FB/27

Brands by name

Popular brands