English
EN
31
Ad
ju
st
se
tt
in
gs
[Speaker Setup]
Optimises the surround output for the connected
speaker system.
Option
Description
[Layout]
Activates the test tone for
•
speakers and subwoofer.
[Speaker
Distance]
Sets the delay time for
•
the subwoofer, centre
or rear speakers if they
are placed closer to the
listening position, so that
the sound output from
all speakers reach the
listening position at the
same time.
[Speaker
Volume]
Sets the volume level
•
of each speaker and
subwoofer to get the ideal
audio balance.
[Frequency]
Sets the speaker size for
•
[Front (L+R)]
,
[Center]
and
[Rear (L+R)]
.
Selects
•
[Large]
size for
speakers that can produce
low frequency signal
below 120 Hz.
Selects
•
[No Speaker]
if there is no speaker
connected.
Selects subwoofer
•
[On]
or
[Off]
.
If the front speakers are
•
set to
[Small]
, subwoofer
setting will be
[On]
and
cannot be changed.
If the subwoofer is set to
•
[Off]
, the front speakers
settings will be
[Large]
and cannot be changed.
Tip
The test tone is emitted from the speaker while
•
adjusting the volume level.
Allow 1ms setting for every 30cm distance between
•
the speaker and the listening position.
Preference Setup
1
Press
.
2
Select
[Settings]
, then press
OK
.
3
Select
[Preference Setup]
, then press
B
.
Video Setup
Advanced Setup
Audio Setup
Preference Setup
EasyLink Setup
OSD Language
Parental Control
Screen Saver
Display Panel
Auto Standby
PBC
Change PIN
English
Off
Off
Normal
On
On
4
Select an option, then press
OK
.
5
Select a setting, then press
OK
.
To return to the previous menu, press
•
BACK
.
To exit the menu, press
•
.
Note
See the explanations of the above options in the
•
following pages.
[OSD Language]
Selects the default on-screen menu language.
