Philips BDP5110/F7 D Service Manual Download Page 26

Page: 26 / 65

1-9-3

E5P50ER

* Server: vTuner broadcast list server

* Broadcast: Server of internet radio broadcast

701 Protocol Error

An exception error occurred during communication between the server or the
broadcast.

702 Start Up Error

The application of this unit failed to start.

703 URL Error

The URL which this unit specified is in invalid form.

705 Connect Failed

Connection with the proxy which exists between this unit and the server or the
broadcast has failed. (IP conversion error)

706 Connect Failed

Connection with the server or the broadcast has failed. (IP conversion error)

707 Connect Failed

Connection with the server or the broadcast has failed.

723 Analyze Error

The received protocol data cannot be analyzed.

727 System Error(Memory)

A system error occurred in the unit. (memory shortage, internal cURL pro-
cessing error)

728 Response Timeout

A response timeout occurred to unit’s connection request.

743 System Error(Program)

A system error occurred in the unit. (program error, internal cURL processing
error)

745 System Error(LAN Port)

A system error occurred in the unit. (LAN unusable, internal cURL processing
error)

752 Response Timeout

A response timeout occurred to unit’s connection request.

755 Disconnect Error(Send)

Because the connection between this unit and the server or the broadcast was
disconnected, it has failed to send the protocol data.

756

Disconnect
Error(Receive)

Because the connection between this unit and the server or the broadcast was
disconnected, it has failed to receive the protocol data.

761 Analyze Error

The received protocol data cannot be analyzed.

790 List Not Found

The list information which was sent from the server is invalid or not found.

791 Stream Timeout

The stream data is not sent from the broadcast.

Status Code

Description

Summary of Contents for BDP5110/F7 D


































































Search results

Summary of Contents for BDP5110/F7 D

Reviews:

Related manuals for BDP5110/F7 D

Brands by name

Popular brands

Philips BDP5110/F7 D, Service Manual

Search results

Summary of Contents for BDP5110/F7 D

Reviews:

Related manuals for BDP5110/F7 D

Brands by name

Popular brands