Philips BDP5110/F7 D, Service Manual

Page: 11 / 65

1-5-1 E5S50DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1), (L-2) and (L-3)
are fragile. Be careful not to break them.
2. When reassembling, be sure to use the original
screws or specified screws listed in the parts
list.
3. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover D1 6(S-1) ---
[2]
Front
Assembly
D2
*4(L-1), *3(L-2),
*4(L-3), *CN6000
1
[3] Front CBA D2 --------------- ---
[4] Rear Panel D3
(S-2), 3(S-3), (S-4),
2(S-5)
2
[5]
BD Main
CBA & BD
Mechanism
Assembly
D4
2(S-6), 4(S-7),
*CN6101, *CN7101
3
[6]
DC Fan
Motor
D5 *CN2004 ---
[7] AV CBA D5
5(S-8), Power Holder,
Main PCB Bracket,
Hook
---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
[2] Front Assembly
[1] Top Cover
[4] Rear Panel
[7] AV CBA
[6] DC Fan Motor
[5] BD Main CBA &
BD Mechanism Assembly
[3] Front CBA
[1] Top Cover
(S-1)
(S-1)
(S-1)
Fig. D1