172
172
•
Unit must tilt up and down with no “Stick / Slip”.
•
Base must provide sufficient friction to hold unit in desired position after adjusting tilt.
7.13 Wall Mount Method
•
VESA in back-cover.
7.14 Label
•
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
7.15 Product Dimension / Weight
•
Unit dimension (with stand) -
TBD
•
Packed unit dimension (carton) - TBD
•
Net
weight
- TBD
•
Gross weight -
TBD
7.16 Transportation
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment from
the supplier to the destination specified in the purchase order. All packaging materials are subject to test and
evaluation perXTN-0009, UAN-D636.
Packaging unit should be protected by corner protector on 4 corners, don’t use surrounding cardboard.
General pallet requirement refer to
wood packaging reqs SBMT-ISBM15-16-03-06.pdf
.
7.16.1 Transportation packages
The overall test sequence is: vibration test, drop test and when applicable cold drop test. The sequential tests have
to be carried out using the same packaging. Vibration, drop test should be performed at ambient temperature (20°C
to 23
o
C) and relative humidity (40% to 65%).
7.16.2 Transportation test procedures
Transportation test specification refers to XTN-0009.pdf, for all regions.
Packaging test
•
Vibration and drop or cant-drop test (UAN-D 1534/01)
•
Vibration and cold/drop test (UAN-D 1534/01, UAN-D 1534/02 and UAN-D 636)
•
Vibration, bump and drop test only for China & India(UAN-D 1534/02)
•
Multiple drop test only for China & India(UAN-D 1534/02)
•
Bump test only for China & India(UAN-D 1534/02)
Un-packaging test
•
Fragility test optionally (UAN-D 1534/01)
•
Drop onto a face (IEC 60068-2-31 test Ec)
•
Vibration test (IEC 60068-2-6 test Fc)
•
Vibration test, screen size < 56cm, only for China & India (GB 9384 / 97)
7.17 Pallet / Container Loading
•
Air shipment -
TBC
•
Sea container 20'(pallet/slip sheet) -
?/?
•
Sea container 40'(pallet/slip sheet) -
?/?
•
Sea container 40' High Cube (pallet/slip sheet) -
?/?
•
Container loading -
Summary of Contents for BDL3215E/00
