background image

Programming track numbers

In the stop position, select and store your CD tracks in

the desired sequence. Up to 20 tracks can be stored

in the memory.

1.

Press 

SEARCH 

or 

§

on the set to select your

desired track number.

2.

Press 

PROG

.

Display: 

PROG

Prog

briefly and your 

selected track number. (

See

5

)

If you attempt to program without first 

selecting a track number, 

noSE

is shown.

3.

Repeat steps 

1-2

to select and store all desired

tracks.

Display: 

FULL

if you try to program more

than 20 tracks.

Reviewing the program

In the stop position, press and hold 

PROG

until the

display shows all your stored track numbers in

sequence.

Erasing a program

You can erase the program by either:

• pressing 

9

twice

CLr

is displayed briefly and 

PROG

disappears.

• You select 

MW

FM

function.

• Open the CD door.

SAFETY & MAINTENANCE INFORMATION 

(See 

7

)

• Don't expose the set, batteries, CDs to humidity,

rain, sand or excessive heat.

• Clean the set with a dry cloth. Don't use any 

cleaning agents containing alcohol, ammonia, 

benzene or abrasives as these may harm the set.

• Place the set on a hard and flat surface so that the

system does not tilt. Make sure there is good 

ventilation to prevent the set overheating.

• The mechanical parts of the set contain 

self-lubricating bearings and must not be oiled or

lubricated.

CD player and CD handling

• If the CD player cannot read CDs correctly, use a

cleaning CD to clean the lens before taking the set

to repair.

• The lens of the CD player should never be touched!

• Sudden changes in the surrounding temperature

can cause condensation on the lens of your CD

player. Playing a CD is then not possible. Do not

attempt to clean the lens but leave the set in a

warm environment until the moisture evaporates.

• Always close the CD door to avoid dust on the

lens.

• To clean the CD, wipe in a straight line from the

centre towards the edge using a soft, lint-free

cloth. Do not use cleaning agents as they may

damage the disc.

Never

write on a CD or attach any stickers to it.

No sound /power

Volume not adjusted

• Adjust the VOLUME

Mains lead not securely connected

• Connect the AC mains lead properly

Batteries exhausted/ incorrectly inserted

• Insert (fresh) batteries correctly

Severe radio hum or noise

Electrical interference: set too close to TV, VCR or
computer

• Move the set to increase the distance

Poor radio reception

Weak radio signal

• FM: Adjust the FM telescopic aerial

nocd

indication

CD badly scratched or dirty

• Replace/ clean CD, see Maintenance

Laser lens steamed up

• Wait until lens has cleared

nFcd

indication

CD-R(W) is blank/ not finalized

• Use a finalized CD-R(W)

dAtA

indication

CD contains non-audio files

• Press 

SEARCH 

or 

§

once or more to skip to a

CD audio track, instead of the data file

The CD skips tracks

CD damaged or dirty

• Replace or clean CD

SHUFFLE or PROG is active

• Switch off SHUFFLE / PROG

Remote control does not function properly (for
AZ1325 model only)

Batteries exhausted/ incorrectly inserted

• Insert (fresh) batteries correctly

Distance/ angle between the set too large

• Reduce the distance/ angle

CD PLAYER 

SAFETY & MAINTENANCE

TROUBLESHOOTING

Environmental information

We have done our best to reduce the packaging and make it easy to separate into 3 materials:
cardboard, expandable polystyrene, polyethylene.

Your set consists of materials which can be recycled if disassembled by a 
specialized company. Please observe the local regulations regarding the 
disposal of packaging, exhausted batteries and old equipment.

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: 

Do not open the set as there is a risk of electric shock! Under no 
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.

Summary of Contents for AZ1301/00C







Reviews: