DIGITAL TUNER
CD PLAYER
8
Programming radio stations
You can store up to a total of 30 radio stations in the memory.
1.
Tune to your desired station (see
Tuning to radio stations
).
2.
Press
PROGRAM
to activate programming.
– Display:
PROGRAM
flashes.
3.
Press
PRESET
4
or
3
once or more to allocate a number from
1 to 30 to this station.
4.
Press
PROGRAM
again to confirm the setting.
– Display:
PROGRAM
disappears, the preset number and the
frequency of the preset station are shown.
5.
Repeat the above four steps to store other stations.
• You can overwrite a preset station by storing another
frequency in its place.
Tuning to preset stations
Press
PRESET
4
or
3
until the desired preset station is displayed.
PLAYING A CD
This CD player plays Audio Discs including CD-Recordables and
CD-Rewritables.
1.
Select
CD
source.
™
is displayed briefly.
2.
Press
OPEN•CLOSE
to open the CD compartment.
™
Display:
when you open the CD compartment.
3.
Insert a CD with the printed side facing up and press
OPEN•CLOSE
to close the CD compartment.
™
Display: the CD player scans the contents of a CD, and then
the total number of tracks and playing time are shown.
Display:
is shown if you have inserted a
non-finalized CD-R(W).
4.
Press
PLAY•PAUSE
2;
(for AZ 2025 model only: on the
remote control
2;
) to start playback.
™
Display: Current track number and elapsed playing time of the
track during CD playback.
5.
To pause playback press
PLAY•PAUSE
2;
.
Press
PLAY•PAUSE
2;
again to resume play.
™
Display: the elapsed playing time flashes when playback is on
pause.
6.
To stop CD playback, press
STOP
9
.
Note:
CD play will also stop when:
– the CD door is opened;
– the CD has reached the end
(unless you have selected REPEAT or REPEAT ALL);
– you select another source: TAPE / TUNER.
AZ 2025 /00
page
8
BATT
LOW
BATT
LOW
English
