RECORDING
12
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC
II
) or
METAL (IEC
IV
) type cassettes. For recording, use NORMAL
type cassettes (IEC
I
) on which the tabs have not yet been
broken.
•
The best recording level is set automatically.
Altering the
VOLUME
,
INCREDIBLE SURROUND
,
DIGITAL DYNAMIC
BASS BOOST
or
ULTRA HIGH CLARITY
controls will not
affect the recording in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. If, however, you
wish to record over this side again, cover the tabs with a piece
of adhesive tape.
SYNCHRO START CD RECORDING
1.
Select
CD
source.
2.
Insert a CD and if desired, programme track numbers.
3.
Press
STOP•OPEN
9/
to open the cassette door.
4.
Insert a suitable cassette into the cassette deck and close the
cassette door.
5.
Press
RECORD
0
to start recording.
– Playing of the CD programme starts automatically from the
beginning of the programme.
It is not necessary to start the
CD player separately.
To select and record a particular passage within a track
•
Press and hold down
SEARCH
∞
or
§
(for AZ 2025 model
only: on the remote control
¡
or
™
).
•
When you recognize the passage you want, release
SEARCH
∞
or
§
.
•
To pause CD playback press
PLAY/PAUSE
2;
(for AZ 2025
model only: on the remote control
2;
).
– Recording will begin from this exact point in the track when
you press
RECORD
0
.
6.
For brief interruptions press
PAUSE
;
. To resume recording,
press
PAUSE
;
again.
7.
To stop recording, press
STOP•OPEN
9/
.
AZ 2025 /00
page
12
BATT
LOW
BATT
LOW
English
