10
ECO mode
When you monitor your baby from a small
distance, you can enable ECO mode. In ECO
mode, the baby monitor consumes less energy,
but still ensures that you can hear your baby
clearly without any distracting noise. For the
operating range in ECO mode, see Section
“Operating range”.
Note
Make sure that the parent unit is linked to the
•
baby unit.
1
To enable ECO mode, press and hold
on the parent unit for two seconds.
The ECO mode indicator lights up
»
blue and the parent unit reboots.
2
To disable ECO mode, press and hold
for two seconds.
The ECO mode indicator goes out
»
and the parent unit reboots.
Reset the baby monitor
To reset the parent unit:
1
Press and hold to turn off the parent
unit.
2
Press and hold
on the parent unit.
3
When you hold
, turn on the parent
unit.
The parent unit is reset.
»
To reset the baby unit:
1
Follow the same procedure as you reset
the parent unit.
Operating range
•
In normal mode
:
Outdoors: up to 330 metres/
•
1000 feet
Indoors: up to 50 metres/150 feet
•
•
In ECO mode
:
Outdoors: up to 260 metres/
•
850 feet
The operating range varies depending on
•
the surroundings and other factors that
cause interference. For interference from
wet and moist materials, the range loss
is up to 100%. For interference from dry
materials, see the following table:
Dry materials
Material
thickness
Loss of
range
Wood, plaster,
cardboard, glass
(without metal,
wires, or lead)
< 30 cm/12 in
0-10%
Brick, plywood
< 30 cm/12 in
5-35%
Reinforced
concrete
< 30 cm/12 in
30-100%
Metal grilles or
bars
< 1 cm/0.4 in
90-100%
Metal or
aluminium sheets
< 1 cm/0.4 in
100%
Change the microphone
sensitivity
You can change the microphone sensitivity of
the baby unit. There are five levels.
1
Press
sensitivity
repeatedly on the parent
unit.
The sound level lights illuminate briefly
»
and indicate the current sensitivity
settings on the baby unit.
EN
