12
Why don’t I hear a sound? Why can’t I hear
my baby cry?
Increase the volume of the parent unit.
•
Increase the microphone sensitivity.
•
Reduce the distance between the baby
•
and the baby unit.
If you use the baby monitor beyond the
•
operating range, move the parent unit closer
to the baby unit to re-establish the link.
Is my baby monitor secure from
eavesdropping and interference?
The DECT technology of this baby
•
monitor guarantees no interference from
other equipment and no eavesdropping.
Why does the parent unit react too quickly to
other sounds?
Remove the sound sources away from
•
the baby unit.
Decrease the microphone sensitivity.
•
Why does the parent unit react slowly to the
baby’s crying?
Make sure that the microphone of the
•
baby unit faces the baby.
Move the baby unit closer to your baby
•
with a minimum distance of 1 metre/
3.5 feet.
Increase the microphone sensitivity.
•
Why do the non-rechargeable batteries of the
baby unit run low quickly? How I save battery
power?
Decrease the speaker volume or the
•
microphone sensitivity.
When the baby unit is not in use, turn off
•
the nightlight and the baby unit.
Enable ECO mode.
•
The specific operating range of the baby
monitor is 330 metres/1000 feet. Why does
my baby monitor manage a much smaller
distance than that?
The specified range is only valid outdoors
•
in open air.
8 Frequently
asked questions
Why doesn’t the link indicator on the parent
unit light up when I press on the parent unit?
Connect the parent unit to a power supply.
•
Reset the parent unit to the default settings.
•
Why doesn’t the on indicator on the baby unit
light up when I press on the baby unit?
Replace the batteries in the baby unit or
•
connect the baby unit to a power supply.
Reset the baby unit to the default settings.
•
Why doesn’t the
indicator on the parent
unit light up when I start recharging the
parent unit?
It takes a few minutes before the battery
•
indicator lights up especially when the
parent unit is charged for the first time or
not in use for a long period of time.
Why does the parent unit beep?
If the parent unit beeps while the
•
link
indicator flashes red, move the parent unit
closer to the baby unit to re-establish link
between the parent unit and the baby unit.
If the parent unit beeps and the battery
•
indicator flashes red, recharge the parent
unit.
If the baby unit is turned off, turn on the
•
baby unit.
Why does the parent unit generate a
high-pitched noise?
Position the parent unit and the baby unit
•
with a minimum distance of 1.5 metres/
5 feet. It takes a few seconds for the
acoustic suppression to activate.
Decrease the volume of the parent unit.
•
EN