Philips AIRFLOSS PRO, Directions For Use Manual

Page: 12 / 88

Auto-burst function
Hold the activation button to deliver bursts continuously, approximately
one second between set of bursts.
1 To switch off the AirFloss Pro, press and hold the power/mode
button for one second.
Automatic shut-off function
The AirFloss Pro automatically switches off if it has not been used for
one minute.
Cleaning
If the AirFloss Pro becomes clogged, or to clean the inside of the AirFloss,
fill the reservoir with warm water and press the activation button until
the reservoir is empty.
Do not clean the nozzle, handle or charger in the dishwasher.
Do not use cleaning agents to clean the appliance. The formulation or
strength of some agents may damage the appliance.
Handle and nozzle
1 Remove the AirFloss Pro nozzle from the handle. Rinse the nozzle
after each use to eliminate the residue left in it (Fig. 16).
2 Open the reservoir and rinse it under a faucet to eliminate
residue (Fig. 17).
Tip: You can also use a cotton swab to wipe the reservoir and remove the
remaining residue.
Note: Do not immerse the handle in water.
Note: Failure to remove residue from the nozzle or reservoir may result in an
unhygienic condition.
3 Wipe the entire surface of the handle with a damp cloth (Fig. 18).
ENGLISH
12