13
45℃
Ambient
Customize
Child Lock
C
210ml
150ml
3S
5 Installation
6 Usage instruction
(
1
)
Set-up
· Please put the dispenser on a cool, well-ventilated and stable place. Keep away from heat.
· Take out the raw water tank and fill it with water. Install it back to the dispenser and cover
the lid.
· Plug in. The dispenser beeps and icons on display panel will be on once it has been set up.
(
1
)
Filtering water
· If the inner water tank for the filtered water is at a low water level,
the dispenser will automatically start to filter the raw water until
the filtration is done. When the “ ”
(
Indicator of water filtration
)
is on, water can still be extracted. When the “ ”
(
Indicator of
water filtration
)
flashes, water cannot be extracted.
(
2
)
Extracting water
· Select the water temperature and volume needed. Press the “ ”
(
Child lock button
)
to unlock. This step is not needed if ambient
water is selected. Tap the extraction button once to get
the water you choose. Tap it again or tap any other button to stop.
· Continuous water extraction: Long press water extraction button
for 3 seconds. The maximum volume extracted is 1 L for a time.
· Note: To avoid being scalded, keep the distance from the nozzle
during extracting hot water.
(
2
)
First time using
· During first time use, please check if any water leaks from or gathers around the dispenser,
if there is any strange noise, burnt smell or smoke coming from the product, please
disconnect the power source and contact customer services if you find any of the situations
above.
· For the first time use, or if the dispenser has not been used for a long time, fill the water
tank and wait until the filtering indicator is off. Continuously extract the water until the
water tank is empty by pressing “ ”
(
85
℃
button
)
and “ ”
(
300ml button
)
for 3
seconds. Repeat this twice.
· Note: When the dispenser starts to heat up the water, in order to avoid dry-heating and
protect the machine, please extract some ambient water before choosing hot water.