56
Operator services
To receive a second call, you must have deactivated the
Call forward
for voice calls (see page 48) and activated
the
Call waiting
(see page 49).
While in communication and one call being on hold,
you may receive a third call. You can either end one of
the calls before being able to answer the third one or
introduce the calling party into a conference (see
below). This service is limited to two current
communications (one active and one on hold).
You activate the conference call by
making several outgoing calls, or create
it from a multiparty call context. You
may have up to five members at the same time and
disconnected all calls at once with
)
.
Make a first call with someone, then a second one (see
“Make a second call” above). Press
,
and select
Conference
. Repeat the process until five members are
connected.
If there is an incoming call during the conference call
and there are less than five members, you can accept
this new call and add this member to the
Conference
call (if five members are already connected, you can
answer the call, but not add it to the conference).
The
Conf. members
options allow you to disconnect a
member of the conference by selecting
Remove party
,
or select
Private call
to have a private call with this
member only (other members are put on hold).
You can connect an active call and a call on hold by
selecting the
Transfer
option. You are disconnected
when the transfer is completed.
This feature is different from the Call forward, which
takes place before you pick up the call (see page 48).
Answer a third call
Conference call
Conference
Explicit call transfer
