Installation & Operation Guide
Vision.net
Ceiling Occupancy Sensor
4
INSTALLATION
Mounting
The Ceiling Occupancy Sensor may be mounted in a junction box or directly to the ceiling
depending on local code. The unit must have an unobstructed view of the area to be
monitored. If the unit is subject to "false triggering" from activity beyond the desired area of
coverage, a portion of the lens may be masked to achieve the desired response. Simply install
the Field of View Customizing Template (provided).
To install:
Step 1. Check for any obstructions located behind the desired mounting location.
Step 2. Drill 1-1/2" hole in the desired mounting location.
Step 3. Place Ceiling Occupancy Sensor through the hole and secure with supplied washer
and locknut.
Step 4. The lens may be removed to install the Field of View Customizing Template.
Simply rotate the lens cover slightly counter-clockwise and remove.
Step 5. Trim the template for the desired effect and install on interior of the lens. (Careful
placement of the template is necessary to ensure proper function.)
Step 6. Replace lens cover and verify that the unit is securely mounted.
Figure 1: Installing Ceiling Occupancy Sensor
RETAINING NUT
WASHER
LOW VOLTAGE
WIRES (4)
