11. PICTURE ADJUSTMENT
11.1 For AV/Component Video
(480i signal)
Accessing Picture Adjustment Mode
Various picture adjustments can be set using the
Picture Adjustment OSD menu.To access the
OSD menu:
1. Press the MENU
+/-
buttons on the remote
control or the front control panel.
2. The first menu displayed is the PICTURE
menu. Make sure that the PICTURE OSD
menu is displayed.
3. Use the MENU
+/-
buttons to move up and
down to select the option you wish to
adjust. An explanation of each adjustment is
listed below.
4. Use the ADJ
+/-
buttons to change the
setting.
Notes:
•
These controls are available when input
selection is set to: AV1, AV2 (S),
Component 1 or Component 2 (when the
input signal is 480i) inputs.
•
To restore picture settings to the factory
defaults, simply press the RECALL button
from the remote control.
CONTRAST
Adjust Contrast to increase the level of ‘white’
in the video picture.
Increasing contrast will make white areas of the
video picture brighter. Contrast works in
conjunction with BRIGHTNESS.
BRIGHTNESS
Adjust brightness to enhance the level of dark
areas in the video picture such as night scenes
and shadow scenes. Increasing brightness will
make dark areas more visible.
COLOR
Use color to adjust the color saturation of the
video picture. Increasing color will make the
color more intense. Reducing color setting will
make the color less intense.
39
User Manual BDH5011
Summary of Contents for 50-WXGA PLASMA MONITOR BDH5011
Page 59: ...59 User Manual BDH5011 ...
