17
User Manual BDH5011
7.4 External
Audio
Connections
Connecting External Amplified Speakers
1. This display can be connected to an external
set of amplified speakers using the AUDIO
OUT jacks located on the back of the
display. In addition, this display is equipped
with a small 3.5 mm phono style plug for
remote turn-on applications that will auto-
matically send a remote turn-on/off signal to
the external amplified speakers.
2. Connect the red (R) and white (L) AUDIO
OUT jacks at the right hand side of the
connector panel to the external amplified
speaker.
3. As an option, you may use the remote turn-
on plug. Please note that not all external
amplified speakers can accept remote-turn
on signals.
Connecting to an External Amplifier
1. This display can be connected to an external
amplifier using the AUDIO OUT jacks
located on the back of the display. In
addition, this display is equipped with a small
3.5 mm phono style plug for remote turn-on
applications that will automatically send a
remote turn-on/off signal to the external
amplifier.
2. Connect the red (R) and white (L) AUDIO
OUT jacks from right side of the connector
panel to the external amplifier or receiver.
3. As an option, you may use the remote turn-
on plug. Please note that not all external
amplifiers can accept remote-turn on signals.
Using the Subwoofer Out
(Connecting a Subwoofer)
1. This display is equipped with a subwoofer
output for connecting to an external
amplified subwoofer.
2. Connect the subwoofer output jack to the
external subwoofer using an RCA cable.
Notes:
•
The AUDIO OUT RCA jacks can be set to
either Fixed or Variable audio output levels.
(See Chapter 10.5 for more information).
•
The RCA subwoofer outputs frequencies
below 120Hz.The subwoofer will use the
same Fixed or Variable audio output setting
as AUDIO OUT RCA jacks.
•
The 3.5mm phono/earphone output level is
always used for remote turn on/off
applications.
Summary of Contents for 50-WXGA PLASMA MONITOR BDH5011
Page 59: ...59 User Manual BDH5011 ...
