8
Programme title
Select
Programme title Yes
or
No
.
When selected
Yes
, after the selection of a TV programme or after pressing
the
i
key on the remote control, a TV channel which broadcasts teletext
may transmit the name of the TV channel or the programme title.
Teletext 2.5
Some broadcasters offer the opportunity to see more colours, other
background colours and nicer pictures in the teletext pages.
&
Select
Teletext 2.5
.
é
Press the cursor right to select
Teletext 2.5 On
to take advantage of this
feature.
“
Press the cursor right again to select
Teletext 2.5 Off
if you like the more
neutral teletext layout.
The selection made is valid for all channels which broadcast teletext 2.5.
Note: It may take a few seconds before teletext broadcast switches over to
Teletext 2.5.
Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound
encoded programmes.
The TV automatically switches to the best surround sound mode when
Auto Surround
is switched
On
.
Subwoofer
Select
Yes
if you installed an external subwoofer. See Connect Peripheral
Equipment, Connect extra subwoofer, p. 20.
Set/Change code
The Child lock feature (see TV, Features, p. 13) allows you to lock channels
to prevent others from watching certain programmes.To watch locked
channels, a 4-digit code must be entered.The Set/Change code menu item
allows you to create or change a Personal Identification Number (PIN).
&
Select
Set/Change code
.
é
If no code exists yet, the menu item is set to
Set code
.
If a code has previously been entered, the menu item is set to
Change
code
. Follow the instructions on screen.
Important:You have forgotten your code !
&
Select
Change code
in the General menu and press
OK
.
é
Press the cursor right and enter the overriding code 8-8-8-8.
“
Press the cursor again and enter a new personal 4-digit code.The previous
code is erased and the new code is stored.
Colour
Select
Colour
and press the cursor right.
If
Auto
is selected, the respective colour system will be automatically
selected according to the transmission system.
(If the reception is poor, select another sound system with the cursor
up/down.)
PLL
In rare cases certain TV channels may reproduce distorted or unstable
pictures.
Select
PLL
(Phase Locked Loop) to switch to the setting 2 with the cursor
left/right to restore the picture for the respective transmission.
Audio recovery
Rarely, and with certain TV channels, the broadcasted audio signal can be
distorted. Select
Audio recovery On
to reduce distortion for that channel.
This will also result in a lower volume level.
General
Menu background
Smart surf
PIP format
Factory settings
OSD
Programme title
Teletext 2.5
Auto surround
Subwoofer
Set/Change code
Colour
PLL
Audio recovery
Setup
