If your router has WPS, you can directly connect to the router
without scanning. Go to the router, press the
WPS
button and
return to the TV within 2 minutes. Then press
Connect
to
make the connection.
If you have devices in your wireless network that use the WEP
security encryption system, you cannot use WPS.
If you must use the
WPS pin code
to connect, select
Scan
instead of WPS.
Step 6 -
In the list of networks found, select your wireless
network and press
OK
.
If your network is not in the list because the network name is
hidden (you switched off the SSID broadcast of the router),
select
Manual entry
to enter the network name yourself.
Step 7 -
Depending on the type of router, you can now enter
your encryption key (WEP, WPA or WPA2). If you entered the
encryption key for this network before, you can select
Next
to
make the connection immediately.
If your router supports WPS or WPS pin, you can select
WPS
,
WPS pin
or
Standard
. Select your choice and press
OK
.
-
Standard
Select
Standard
to enter the encryption key (password,
passphrase or security key) manually. You can use the
keyboard on the RC to enter the encryption key. Once you
have entered the key, press
Connect
.
-
WPS pin
To make a secured WPS connection with a PIN code, select
WPS pin
and press
OK
. Write down the 8-digit PIN code
shown and enter it in the router software on your PC. Return
to the TV and press
Connect
. Consult the router manual on
where to enter the PIN code in the router software.
Step 8 -
A message will be shown when the connection is
successful.
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to
On
.
Alternatively, if you are an advanced user and want to install
your network with static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press
h
and select
S
Setup
and
press
OK
. Select
Network settings
>
Network configuration
>
Static IP
. With Static IP selected in the menu, you can set
the IP address and other necessary settings in
Static IP
configuration
in the same menu.
Network problems
Wireless network not found or distorted
•
Microwave ovens, DECT phones or other Wi-Fi 802.11b/g/n
devices in your proximity might disturb the wireless network.
•
Make sure that the firewalls in your network allow access to
the TV's wireless connection.
•
If the wireless network does not work properly in your home,
try the wired network installation.
Internet does not work
•
If the connection to the router is OK, check the router
connection to the Internet.
The PC and Internet connection are slow
•
Look in your wireless router's user manual for information on
indoor range, transfer rate and other factors of signal quality.
•
Use a high-speed (broadband) Internet connection for your
router.
Wired connection
What you need
You need a network
router
to connect the TV to the Internet.
Use a router with a high-speed (broadband) connection to the
Internet.
Installation
Follow steps
1
to
5
.
1 -
Connect the router to the TV with a network cable
(Ethernet cable**).
2 -
Make sure that the router is switched on.
3 -
Press
h
and select
S
Setup
and press
OK
.
4 -
Select
Connect to network
and press
OK
.
5 -
Select
Wired
and press
OK
.
The TV constantly searches for the network connection. A
message will be shown when the connection is successful.
Network configuration
If the connection fails, you can check the DHCP setting of the
router. DHCP should be set to On.
Alternatively, if you are an advanced user and want to install
your network with static IP addressing, set the TV to Static IP.
To set the TV to Static IP, press
h
and select
S
Setup
and
press
OK
.
Select
Network settings
>
Network configuration
>
Static
IP
. With Static IP selected in the menu, you can set the IP
address and other necessary settings in
Static IP configuration
in the same menu.
Media server software
With media server software on your computer, you can open
your photos, music and videos stored on your computer on
your TV screen.
Use a recent version of media server software like Windows
Media Player 11, Twonky™ or similar*.
Install the software on your computer and set it up to share
your media files with the TV. Read the manual of the media
server software for more information.
To open your files on TV, the media server software must be
running on your computer.
8
Setting up / Network
