40
Connect Accessory Devices
Peripherals connected to AV3
There are three possible ways to connect your Accessory Devices to the
AV3
input.
&
•
In case of a peripheral with CVBS output, connect the video cable to the
video input of the TV.
•
In case of a peripheral with S-VHS output, connect the video cable to the
S-VIDEO
input of the TV.
•
In case of a peripheral with component video cables, connect them to the
Pb
,
Pr
and
Y
inputs
AND
also connect a video cable to the video input
(in order to have correct picture reproduction).
é
Always connect the audio cables to the peripheral’s
AUDIO L
and
R
jacks
and to the
L AUDIO
and
R AUDIO AV3
jacks on the TV.
When you have a Digital Antenna cable connected to a digital Set top Box,
connect the Set top Box to the
AV4 IN VIDEO 2 Fh
input.
Connect a Set top Box with 2 Fh RGB output to the H, V, Pr, Pb and
Y
jacks and to the
L
and
R AUDIO
jacks.
Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks
and to the
L
and
R AUDIO
jacks.
See also the manual of your High Definition Set top Box.
Note: This television is designed to accept high definition signal standards as specified
by the Electronic Industries Association standard EIA770.3.
Set-top boxes from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in
the right way:
- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
- for RGB 2Fh:
check additionally if the H and V cables are connected to the
respective H and V input connectors, and if necessary exchange
both connections.
AV4 Digital High Definition input
G-LINK
IR SHOOTER
AV 3
IN
Pr
Pb
VIDEO
L AUDIO
R AUDIO
Y
S VIDEO
AV 4
IN
VIDEO 1080i - 2Fh
H
V
Pr
Pb
Y
/ R
/ B
/ G
AUDIO
L
R
&
Connect your camera or camcorder to the AV inputs at the right side of
your TV.
é
Connect the device to
VIDEO
2
and
AUDIO L
3
for mono devices.
“
For stereo devices also connect
AUDIO R
3
.
S-Video quality with an S-VHS, Hi-8 or Digital camcorder is obtained by
connecting the S-Video cables with the
S-VIDEO
input
1
(instead of
VIDEO
2
) and
AUDIO
inputs
3
.
Note: If you prefer, you can also connect the camcorder to one of the TV’s rear
AV IN
jacks.
Camera and Camcorder
AUDIO
VIDEO
S•VIDEO
3
2
1