15
Satellite Receiver with a recorder
&
Connect the RF Antenna or Cable TV cable
1
to
the
RF IN
socket of your recorder.
é
Connect another RF cable
2
from the output of
your recorder to the TV’s 75
ø
x
jack.
“
Connect the satellite antenna cable
3
to the
satellite receiver’s
SATELLITE IN
jack.
‘
Connect the AV cables
4
to the satellite receiver’s
AV OUT
jacks and to the VCR’s
AV IN
jacks.
(
Connect the recorder’s
AV OUT
jacks
5
to the TV’s
AV2 IN
jacks.
DVD player or other accessory digital source equipment
Equipment with AV connectors only
&
Connect the video cables to the equipment’s
AV OUT
jacks and to the TV’s
AV1
or
AV2 IN
jacks.
é
Connect the audio cables to the equipment’s
AUDIO L
and
R
jacks and to the
L AUDIO
and
R AUDIO AV1
or
AV2
jacks on the TV.
(According to where you connected the video
cables, to
AV1
or
AV2
.)
Equipment with an
S-VIDEO
connector
&
Connect an S-video cable the
AV2
S-VIDEO
input.
Note: When using the s-video connector do not
connect any device to the video input.
é
Connect the audio cables to the equipment’s
AUDIO L
and
R
jacks and to the
L AUDIO
and
R AUDIO AV2
jacks on the TV.
With Component Video Output Connectors
&
Connect the cables of your
YPbPr
equipment
1
to the
YPbPr
input
AV1 IN
sockets on the
TV.
Note: The YPbPr sockets on the TV are compatible
with 480i (interlaced, 1 Fh) output signals only,
not
480p (progressive scan, 2 Fh).
é
For reproduction of CVI (Component Video
Input) and in order to have correct picture
reproduction, also connect a video cable to
video of
AV1
2
.
Note: This connection is used for
AV1
(CVBS).
“
Connect the Audio left and right (only for
stereo devices) cables
2
to the
AUDIO L
and
R
input of
AV1
.
Remark: Equipment may also be connected to the
AV IN
jacks (
SIDE
) at the right side of the TV.
Warning: Never connect a signal to the Y-input
and video-input at the same time.This may
cause picture distortion !
Equipment with Progressive scan output
(480p or 1080i 2 Fh)
Connect the equipment to the
AV4 IN
jacks on
the TV.
See
AV3
or
AV4
Digital HD input, next page.
Note: The labels for the component video sockets
may differ depending on the DVD player. Although
the abbreviations may vary, the letters B and R
stand for the blue and red component signals,
respectively, and Y indicates the luminance signal.
Refer to the DVD player’s instructions for use for
definitions and connection details.
AV 2
in
AV 1
in
Monitor
out
VIDEO
L
R
Y
Pb
Pr
AUDIO
S-VIDEO
REC
CABLE
SAT
≈
IN
OUT
SAT
IN
OUT
IN
OUT
AV 2
in
AV 1
in
Monitor
out
VIDEO
L / Mono
R
Y
Pb
Pr
AUDIO
S-VIDEO
5
75
3
4
2393.2 en.qxd 06-09-2004 11:19 Pagina 15
