Philips 273E3LSW/93 Service Manual Download Page 79

Page: 79 / 80

Meridian 3

REGULATORY COMPLIANCE

Worldwide

Regulatory

ŘŘŠœŦŨŶŭŢŵŰųźįŹŭŴ

EMC Requirements

Supplier DVT EMI test result must be submitted prior to DVT samples delivery, and PVT EMI test result

must be submitted again prior to PVT samples delivery. Which also has to meet Philips' immunity testing
specification.

RoHS

Restriction on the use of certain hazardous substances.

Lead, Cadmium, Mercury, Hexavalent Chromium, Polybrominated Bipheny1 (PBB) and
Polybrominated Bipheny1 Ether (PBDE)(flame retardant).

WEEE

Producer (Philips) responsible for retailer take back schemes and recycling.
--System implemented.
--Collection and recycle targets.

Ongoing Regulatory

There's a possibility that other regulatory certificates will be required during the life of the product. It is the

responsibility of the supplier to provide related documentation.

Summary of Contents for 273E3LSW/93

















































































Search results

Summary of Contents for 273E3LSW/93

Reviews:

Related manuals for 273E3LSW/93

Brands by name

Popular brands

Philips 273E3LSW/93, Service Manual

Search results

Summary of Contents for 273E3LSW/93

Reviews:

Related manuals for 273E3LSW/93

Brands by name

Popular brands