Philips 273E3LSW/93 Service Manual Download Page 6

Page: 6 / 80

Meridian 3

Note:

1. EPEAT Gold or Silver is valid only where Philips registers the product Please visit www. epeat.net for

registration status in your country.

2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of

leaflet.

3. This monitor is brominated flame retardant and polyvinyl chloride-free (PVC/BFR free) for all user accessible

parts (excluding cables and adaptors). Organobromine compounds in the form of flame retardants must not be

used in those portions equal to or greater than 0.09%(900ppm maximum of Bromine) and organobromine

compounds in the form of polyvinyl chloride or polyvinyl chloride congeners must not be used in those portions

equal to or greater than 0.1% (1000ppm maximum of Chlorine).

Summary of Contents for 273E3LSW/93

















































































Search results

Summary of Contents for 273E3LSW/93

Reviews:

Related manuals for 273E3LSW/93

Brands by name

Popular brands

Philips 273E3LSW/93, Service Manual

Search results

Summary of Contents for 273E3LSW/93

Reviews:

Related manuals for 273E3LSW/93

Brands by name

Popular brands