background image

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1

.  Read these instructions.

2.

  Keep these instructions.

3

.  Heed all warnings.

4.

  Follow all instructions.

5.

   Do not use this TV near water.

6.

   Clean only with a dry cloth.

7

.  Do not block any of the ventilation openings. Install in accordance 

with the manufacturers instructions.

8.

   Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

9.

   Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider than the 

other. A grounding type plug has two blades and third grounding 

prong. The wide blade or third prong are provided for your safety. 

When the provided plug does not fit into your outlet, consult an 

electrician for replacement of the obsolete outlet.

10

.  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point where 

they exit from the apparatus.

11

.  Only use attachments/accessories specified by the manufacturer.

12

.   

       Use only with a cart, stand, tripod, bracket, or table               

 

              specified by the manufacturer, or sold with the TV  

 

 

       When a cart is used, use caution when moving      

       the cart/TV combination to avoid injury from tip-over.

13

.  Unplug this TV during lightning storms or when unused for long 

periods of time.

14. 

 Refer all servicing to qualified service personnel. Servicing is 

required when the TV has been damaged in any way, such as 

power-supply cord or plug is damaged, liquid has been spilled or 

objects have fallen into apparatus, the TV has been exposed to rain 

or moisture, does not operate normally, or has been dropped.

15

.  This product may contain lead and mercury. Disposal of these 

materials may be regulated due to environmental considerations. 

For disposal or recycling information, please contact your local 

authorities or the Electronic Industries Alliance: www.eiae.org

16.

  Damage Requiring Service - The TV should be serviced by qualified 

service personnel when:

A

.  The power supply cord or the plug has been damaged; or

B.

  Objects have fallen, or liquid has been spilled into the TV; or

C.

  The TV has been exposed to rain; or

D.

  The TV does not appear to operate normally or exhibits a 

marked change in performance; or

E.

  The TV has been dropped, or the enclosure damaged.

17.  Tilt/Stability

 - All televisions must comply with recommended 

international global safety standards for tilt and stability properties 

of its cabinet design.

 

• Do not compromise these design standards by applying excessive 

pull force to the front, or top, of the cabinet which could ultimately 

overturn the product.

 

• Also, do not endanger yourself, or children, by placing electronic 

equipment/toys on the top of the cabinet. Such items could 

unsuspectingly fall from the top of the set and cause product 

damage and/or personal injury. 

18.  Wall or Ceiling Mountin

g - The TV should be mounted to a 

wall or ceiling only as recommended by the manufacturer.

19.  Power Lines 

- An outdoor antenna should be located away from 

power lines.

20. Outdoor Antenna Grounding

 - If an outside antenna is 

Outdoor Antenna Grounding

Outdoor Antenna Grounding

connected to the receiver, be sure the antenna system is grounded so 

as to provide some protection against voltage surges and built up static 

charges.

 

Section 810 of the National Electric Code, ANSI/NFPA No. 70-

1984, provides information with respect to proper grounding of 

the mast and supporting structure, grounding of the lead-in wire to 

an antenna discharge unit, size of grounding connectors, location 

of antenna-discharge unit, connection to grounding electrodes, and 

requirements for the grounding electrode. See Figure below.

21

.  

Object and Liquid Entry

 - Care should be taken so that objects 

do not fall and liquids are not spilled into the enclosure through 

openings.

     a) Warning: To reduce the risk of fire or electric shock, this 

apparatus should not be exposed to rain or moisture and objects 

filled with liquids, such as vases, should not be placed on this 

apparatus.

22.  Battery Usage CAUTION 

- To prevent battery leakage that 

may  result in bodily injury, property damage, or damage to the unit:

 

• Install all batteries correctly, with + and - aligned as marked on   

the unit.

 

• Do not mix batteries (old and new or carbon and alkaline, etc.).

 

• Remove batteries when the unit is not used for a long time.

Example of Antenna Grounding

as per NEC - National Electric Code

Note to the CATV system installer:

 This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC  

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the 
building, as close to the point of cable entry as practical.

3

Summary of Contents for 26PW9100D - Hook Up Guide












































Reviews: