Philips 26HFL5561H/27, Quick Start Manual

Page: 15 / 18

13
10 Troubleshoot basic
problems
This section describes commonly encountered issues and accompanying
solutions.
The TV does not communicate with the external interactive terminal:
Press
RECALL
on the setup remote control. Check that the status of
communication is: “ COMMUNICATION SP-SPI ONLINE ”.
•
If the communication protocol in the status is not
SP-SPI
, set
the communication protocol by following the instructions in the
previous chapter.
• If the communication status is OFFLINE , check that the RJ12
cable and the other cables are connected properly.
The letter ‘F’ appears on the screen:
•
If the letter ‘F’ appears on the screen, it indicates that the TV
is in factory mode. To restore the TV to normal settings, press
VOLUME (-)
and
P/CH (-)
buttons on the side of the TV,
simultaneously for a few seconds.
•
•