2
250ML Lighting Control Consoles
Operation Guide
IMPORTANT INFORMATION
Warnings and Notices
Additional Resources for DMX512
For more information on installing DMX512 control systems, the following publication is available for purchase
from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide
for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT
315 South Crouse Avenue, Suite 200
Syracuse, NY 13210-1844
Phone: 1.800.938.7488 or 1.315.463.6463
www.usitt.org
Philips Strand Lighting Limited Two-Year Warranty
Philips Strand Lighting offers a two-year limited warranty of its products against defects in materials or
workmanship from the date of delivery. A copy of Philips Strand Lighting two-year limited warranty containing
specific terms and conditions can be obtained by contacting your local Philips Strand Lighting office.
When using electrical equipment, basic safety precautions should always be followed including the following:
a.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
.
b. Do not use outdoors.
c. Keep dry. This product is not waterproof, and may malfunction if exposed to high levels of
humidity. Rusting of the internal mechanism can cause irreparable damage.
d. Do not mount near gas or electric heaters.
e. Keep away from strong magnetic fields. Do not use or place this device in vicinity of equipment that
generates strong electromagnetic radiation or magnetic fields. Strong static charges or strong
magnetic fields produced by equipment such as radio transmitters could interfere with the display or
affect the product's internal circuitry.
f. Equipment should be mounted in locations and at heights where it will not readily be subjected to
tampering by unauthorized personnel.
g. The use of accessory equipment not recommended by the manufacturer may cause an unsafe
condition.
h. Do not use this equipment for other than intended use.
i. Refer service to qualified personnel.
SAVE THESE INSTRUCTIONS
.
WARNING
: You must have access to a main circuit breaker or other power disconnect device
before installing any wiring. Be sure that power is disconnected by removing fuses or turning the
main circuit breaker off before installation. Installing the device with power on may expose you to
dangerous voltages and damage the device. A qualified electrician must perform this installation.
WARNING
: Refer to National Electrical Code® and local codes for cable specifications. Failure to
use proper cable can result in damage to equipment or danger to personnel.
WARNING
: This equipment is intended for installation in accordance with the National Electric
Code® and local regulations. It is also intended for installation in indoor applications only. Before
any electrical work is performed, disconnect power at the circuit breaker or remove the fuse to avoid
shock or damage to the control. It is recommended that a qualified electrician perform this
installation.
Summary of Contents for 250ML
Page 1: ...For Console Software Version 1 1 x Up ...
Page 60: ......
