Philips 24PHA4309, User Manual

Page: 26 / 30

24 EN
Channel issues
Previously installed channels do not appear in
the channel list:
•
Check that the correct channel list is
selected.
Picture issues
The TV is on, but there is no picture:
•
Check that the antenna is properly
connected to the TV.
•
Check that the correct device is selected
as the TV source.
There is sound but no picture:
• Check that the picture settings are
correctly set.
Poor TV reception from the antenna
connection:
• Check that the antenna is properly
connected to the TV.
• Loudspeakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
• If the reception on one particular channel
is poor, please fine tune this channel.
There is poor picture quality from connected
devices:
• Check that the devices are connected
properly.
• Check that the picture settings are
correctly set.
The TV did not save your picture settings:
•
Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
• Try using a different picture format.
The picture position is incorrect:
• Picture signals from some devices may not
fit the screen correctly. Please check the
signal output of the device.
9 Troubleshooting
This section covers common problems and their
accompanying solutions.
General issues
The TV cannot be switched on:
• Disconnect the power cable from the
power outlet. Wait for one minute before
reconnecting it.
• Check that the power cable is securely
connected.
The remote control is not working properly:
• Check that the remote control batteries
are correctly inserted according to the +/-
orientation.
• Replace the remote control batteries if they
are flat or weak.
• Clean the remote control and TV sensor lens.
The standby light on the TV is red and blinking:
• Disconnect the power cable from the power
outlet. Wait for the TV to cool down before
reconnecting the power cable. If the light
continues to blink, please contact Philips
Customer Care Centre.
You forgot the code to unlock the TV lock feature
• Enter '3448'.
The TV menu is in the wrong language.
• Change the TV menu to your preferred
language.
When turning the TV On/Off or to Standby, you
hear a creaking sound from the TV chassis:
• No action is required. The creaking sound
comes from the normal expansion and
contraction of the TV as it cools down
and warms up. This does not impact its
performance.