Philips 24PHA4309, User Manual

Page: 13 / 30

English
11 EN
Summary of picture formats
Configuration of the picture setup listed below.
Notes
•
Some picture setups may be unavailable due to
differences between picture signal formats.
[16:9]:
Change the normal
ratio to widescreen format.
[4:3]: The normal format.
[Zoom 1]: Horizontal
scaling of the widescreen
picture format. When this
format is used, the two
edges of the picture frame
will be partly cut off.
[Zoom 2]:
Set the normal
ratio to widescreen format.
(PC mode only has options
for normal, widescreen and
Point to Point).
[Point to Point]: Used for
HDMI connections on PCs.
Will display the PC's full
screen in order to achieve
the best display effect.
• [Sleep Timer] : Sets the duration the
TV remains idle before it automatically
enters standby mode. Adjust
the time with the sleep button
on the remote control. Options:
Off/10/20/30/60/90/120/180 minutes.
(Does not apply in PC mode).
•
[Power On Status] : Sets the TV’s status
when it is connected to an AC power
supply.
• [Time Setup] : Sets the system time.
•
[Freeze Switch] : Sets the channel
freeze switch mode. (Only displayed in
TV mode)
• [TTX Language] : Sets the TTX
language (Can only be used in TV
mode).
•
[Color System] : Sets the AV color
system. (Only displayed in AV mode)
•
[HDMI] : Sets the HDMI mode. (Only
displayed in 480p/576p/720p/1080p
HDMI modes.)
• [Reset] : Restores the default setup.
(Excluding password setup and channel
information)
Changing picture format
1
Press
ADJUST
and select
[Setup]
.
2
Press Select [Picture Format] .
3
Select a picture format.
4
Press OK to confirm.