!
44 Meridian 3
10. Mechanical Instructions
Step 1: Remove the stand base ASSY
1. Place the monitor face on a safe surface, and
remove the COVER HINGE.
2. Remove the
four
screws to remove the stand base
ASSY from the monitor.
Step 2: Remove the rear cover
1. Remove the
one
screw and open the latches along
the red arrowhead direction as the picture to open
other latches.
2. Backward the rear cover.
3. Disconnect the cables to remove the rear cover and
remove the
one
screw to remove headphone jack
board.
247E3LH
Summary of Contents for 247E3LHSU/00
Page 43: ...43 Meridian 3 247E3LPH Flash ROM VGA EEPROM HDMI EEPROM Scaler IC DC DC FFC Connector ...
Page 52: ... 52 Meridian 3 Click Finish to complete the USB serial port driver installation ...
Page 61: ...61 Meridian 3 2 Tick the Analog DVI and click Loadfile to set the parameters 247ELH 247ELPH ...