PBS settings
[PBS mode]
Enables / disables the Professional mode.
[On]:
•
All settings in the Professional
mode Setup menu are in effect.
[Off]:
•
The TV operates as a normal
(consumer) TV.
[Application]
1
When application is
[Hospitality]
, the
following are activated.
Last status is disabled.
•
Limited Consumer menu: When
•
in Professional mode, the guest can
display the Consumer menu to adjust
TV parameters. However, these
settings will not be stored in TV
memory.
TV lock and parental ratings (except
•
Sleep timer) are disabled.
Entry into service mode is disabled
•
in order to prevent the guest from
changing service settings.
2
When application is
[Signage]
, the below
functions behave as per normal consumer.
Last status is enabled.
•
The full TV menu can be accessed and
•
changes are stored in TV memory.
TV lock and parental ratings are
•
enabled.
Entry into service mode is enabled.
•
Note
•
The default application for TV should be
[Hospitality]
, while that for monitor should
be
[Signage]
.
[Consumer setup]
A shortcut to enter the full TV menu. This
allows the installers to do all the TV setup
settings.
Note
Selects
•
[PBS settings]
>
[Store]
to save
the changes in the
[Consumer setup
menu].
[Smartloader / USB to TV]
Loads the TV configuration data (including the
video, audio, channel Table, and Professional
mode settings) from a Smartloader / USB device
to the TV set.
[TV to Smartloader / USB]
Loads the TV configuration data (including the
video, audio, channel Table, and Professional mode
settings) from the TV set to a Smartloader /USB
device.
[Store]
Selects
[Confirm]
to store Professional mode
settings.
Note
After storing the settings, refer to page 29
“Low power standby (Green / Fast)”
:
When
•
[Fast]
is selected, you need to
restart the TV mains power for the
changes in Professional mode to take
effect.
When
•
[Green]
is selected, you need to
switch the TV from standby to on again
for the changes in Professional mode to
take effect.
[Reset]
Selects
[Yes]
to reset all settings in Professional
mode to factory default.
Switch on settings
[Maximum volume]
This option specifies the maximum allowable
volume level of the TV.
[Switch on picture format]
Sets available picture format when the TV is
switched on.
Note
If the picture format is not supported
•
with the activated source,
[Auto format]
detection is applied.
