Philips 22HFL3008D/12, Service Manual

Page: 14 / 92

Mechanical Instructions EN 14 TPM10.1HE LA 4.
2013-Dec-13
back to
div. table
Figure 4-8 Rear cover removal
4.4.2 Small Signal Board (SSB)
Refer to Figure 4-9 for details.
Caution: it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
1.
Release the clips from the LVDS connector that connect
with the SSB [1].
Caution: be careful, as these are very fragile connectors!
2. Unplug all other connectors [2].
3. Remove all the fixation screws from the SSB [3].
4. The SSB can now be shifted from side connector cover,
then lifted and taken out of the I/O bracket. Refer to
Figure 4-9
for details.
Figure 4-9 SSB removal
19461_104_131203.eps
131203
1
Q4 × 28
Q3 × 8
1
1
2 2
2
2
Q3 × 12
3
3
3
19461_105_131203.eps
131203
2
1
3
3
3
3