Philips 202P4, Service Manual

Page: 78 / 121

70
GENERAL PRODUCT SPECIFICATION(Continued)
Go to cover page
202P4 M25P
02-01-23
590
32
C.P CHOU
22"AUTO SCAN CMTR-M25P-202P4
TYPE : 202P40/00C
BRAND : PHILIPS
8639 000 11833
02-01-23
21
4.19 Moire
At 15FL contrast & moire is acceptable if not over 1/3 area..
4.20 Ringing
Apply a full white pattern at 128.5KHz, set horizontal raster symmetrically by
r aster
shift press the OSD button & select horizontal position shift the image to the
left edge of the raster. the yoke ring should less than 20mm.
4.21Tapping test
No interference does disturb the monitor picture during tapping test with a
rubber hammer.
4.22 Distance between two monitors
Two monitors of the same monitor type which were conducted with different
Modes or frequencies,don't show any interence in a distance down to 25cm.
5.0 Mechanical characteristics
5.1 Controls
Front side:
- AC power switch
- OSD function key
Rear :
- D- sub / BNC
- Power cord socket
.
5.2 Unit dimension / Weight
REF. TO SHEET 560
5.3 Tilt and swivel base
REF. TO SHEET 191
5.4 Transportation packages
REF. TO SHEET 560
6.0 Environmental characteristics
The following sections define the interference and susceptibility condition
limits that might occur between external environment and the display device.