Philips 200WP7EB/00, Service Manual

Page: 26 / 97

26
Go to cover page
200WP7 LCD
DDC Instructions
Step 6: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other I C chip. To save DDC data, follow the steps below:
1. C lick (Save) icon (or click "file"-> "save as") from the tool bar
And give a file name as shown in Fig. 3 2 .
The file type is E D I D 4 6 file (*.ddc) which can be open in W ord P ad.
By using W ord P ad, the texts of DDC data & table (1 2 8 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table are completely
correct, it can be saved as .ddc flie to re-load it into DDC I C for DDC
D ata application.
2 . C lick . Save
Step 7: Exit DDC program
P ull down the File menu and select Exit as shown in Fig. 33.
Step 5: Write DDC data
1. C onfiguration should be as Fig. 31. And press OK.
3. C lick ( W rite E D I D ) icon from the tool bar to write DDC data.
Fig. 31
Fig. 33
Fig. 3 2
2. Access Factory Mode
[ P ush AUTO " " & OK " " buttons at the same time and
hold it ] + [ P ress power " " button untill comes out " W indows
screen"] => then release all button
- Turn off monitor.
-
Edid45.1
200P7
BO M C ode
P anel Supplier C O D E
AUO 1
CP T 2
LPL ( LG ) 3
QD I 4
CM O 5
B Z 3 A 0 6 0 1 0 0 0 0 0 1
SE R IA L N O
Y EA R/W EEK
SE RV I C E V E R SIO N C HA NG E C O D E
BO M C O D E(BI LL OF M ATE R IA L ) C O D E
SITE C O D E( PR O D U C TIO N C E N TE R )
B Z C O D E(A R - CZ E C H R E P UB L I C
VN -HU NG A RY (S ZR ),B Z -SU Z HOU
D S- D O NGG UA N )
http://www.wjel.net