Philips 200WP7EB/00, Service Manual

Page: 23 / 97

23
Go to cover page
200WP7 LCD
To Monitor
D -sub/ D VI cable
DC 8~1 2 V
To P rinter port
P ower
indicator
To Monitor
D -sub cable
DC 8~1 2 V
To P rinter port
P ower
indicator
DDC Instructions
To Monitor
D -sub/ D VI cable
DC 8~1 2 V
To P rinter port
P ower
indicator
To Monitor
D -sub cable
DC 8~1 2 V
To P rinter port
P ower
indicator
PC
To
printer
port
(
L
T
P
1)
P rinter
P ort
To Monitor
To PC
To Monitor
D -sub/ D VI cable
DC 8~1 2 V
To P rinter port
Re-programming Analog DDC IC
Step 1: After initialize alignment box, connecting all cables and
box as shown in Fig. 11
Fig. 1 2
Step 2: Read DDC data from monitor
1. C lick icon as shown in Fig. 11 from the tool bar to bring up
the C hannels " C onfiguration Setup" windows as shown in Fig. 1 2 .
Step 3: Modify DDC data (verify EDID version, week, year)
1. C lick (new function) icon from the tool bar, bring up
Step 1 of 9 as shown in Fig. 15 .
E
D I D 45 DDC application provides the function selection and
text change (select & fill out) from Step 1 to Step 9.
Step 4: Modify DDC data (Monitor Serial No.)
Next 1. C lick to step 7 , bring up Fig. 16.
- Serial number can be filled up or be changed at this moment.
-
C lick Finish to exit the Step window.
3 . C lick OK button to confirm your selection.
4. C lick icon (Read E D I D function) to read DDC E D I D data from
monitor. The E D I D codes will display on screen as shown in Fig. 14.
Fig. 16
2 . Select the DDC2 Bi as the communication channel.
As shown in Fig. 1 3 .
Fig. 11
1= P ower connector
2 = D -SUB connector
Fig. 1 3
Fig. 14
Fig. 15
Fig. 1 7
Step 5: Write DDC data
1. C onfiguration should be as Fig. 1 7 . And press OK.
http://www.wjel.net