Philips 200PW8ES/00, Service Manual

Page: 60 / 84

60 HUDSON 8
8
GENERAL PRODUCT SPECIFICATION(Continued)
i. Purpose: Design for general office application, like word processing, Spreadsheet and
email. The screen is dominated by text.
ii. Enhancement point:
1. A little sharpness for increasing the details of e.g. an excel grid.
No other type of enhancement as it won't bring value.
2. Color temperature remains in 6500
°
K.
3. Brightness level should be 70%.
4. Smart Response set to "Off".
5. Smart Contrast set to "Off".
B. Entertainment
i. Purpose: Design for video application, Like Microsoft Media Player or Real Player. The
screen is dominated by video.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC) should be
implemented.
2. Sharpness enhanced 90%.
3. Color enhancement set as the same with Video.
4. Color temperature set to 9300
°
or original (if higher)
5. Brightness level sets to maximum.
6. SmartResponse set to "High"
7. Gamma Table turn off to achieve fastest response time.
8. Smart Contrast set to "On"
C. Image Viewing
i. Purpose: Design for image viewing application, especially in slide show. The screen is
dominated by picture. Powerpoint presentation could use this profile also.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC) should be
implemented.
2. Sharpness and color to be enhanced 75%.
3. Color temperature 6500
°
K (or even 5500
°
K, but it should be checked against
the light output)
4. Brightness level sets to maximum.
5. Smart Response set to "Off".
6. Smart Contrast set to "Off".
D. Economy
i. Purpose: Adjust brightness level for reducing power consumptions
ii. No optimization by Smart Image.
iii. Design:
1. Brightness level set to 50%, a little higher brightness level than laptop PC, fine
tune brightness level before DVT exit.
2. Color temperature set to original
3. Gamma Table is turn on to reduce bad color tracking.
E. Off
i. Purpose: No optimization by SmartImage Lite.
ii. Design:
1. This will follow user OSD setting. If any change by user, it will be saved. When
switch back from other SmartImage Lite profiles, it will go back to last saved
setting.
2. Gamma Table is turn on to reduce bad color tracking.
3.14.1.7 Demo mode
A. Purpose: Built-in demo mode for sales in-store demo.
B. Design:
i.Dynamically split screen to 2 vertical frames with one vertical white line. The line
width is 2 pixels. The left frame will be enhanced by SmartImage Lite and right
frame remains original performance.
ii. There is OSD showing “SmartImage Lite & SmartResponse Demonstration” in left
frame and "Original Image" in right frame.
iii. The OSD word color is white with transparent background.
iv. The demo profile will be "Video Playback" profile with "High" ODC setting.
v. The current SmartContrast value also be shown on the bottom of the screen.
C. Hot keys to trigger:
Press [Smart Image] 3 seconds or more to trigger the demo mode.
When demo mode is On, press 3 seconds or more to turn off the demo mode.
When the demo mode is enabled, the blue LED will flash until demo mode
disabled
BRAND : PHILIPS
20 inch LCD Monitor
TYPE : 200PW8
2007-11-23
590
2007-11-23
http://www.wjel.net