Meridian 2 101
Position
The position of the button is at the bottom center of the screen.
SmartImage Lite Logo & Banner
As design to keep the LightFrame logo at header but change the name to “SmartImage” with bitmap
format.
Icon of each profile
Each profile will use text instead of icon & text before.
User Operation Procedure
A. 3 different modes are switched to next in the sequence from 1 to 3 then back to 1 while pressing this
button: 1) Standard 2) Internet 3) Game. The default setting is “Standard”.
B. The FOS optimization will be changed in real time by which profile to be scrolled, users don’t need to
confirm to enable.
C. The SmartImage Lite OSD will remain on screen for 5 seconds after user last action. Or user can also
press [MENU] to close the Smart Image OSD immediately.
D. Except using [MENU] button to scroll down profile. If Smart Image OSD already launched onscreen.
User is allowed to use up/down key to choose profile and press [MENU] to confirm selection and
close the Smart Image OSD.
E. If the model has multiple inputs including VGA and DVI, each input has their own set of profiles. When
user switch input, the profile to be applied will also change.
F. Each input can memorize their individual “SmartImage Lite” profile status.
For example, SmartImage is on with “Game” profile at VGA input, when switch to DVI input, the Smart
Image will revert to previous profile of DVI.
In the input switching process the “SmartImage” OSD will also show up to present which profile is
selected if “Smart Image” is enabled at that input.
The Smart Image status will also be stored after the monitor is resumed from AC on/off or power switch
on/off.
Linkage between SmartImage Lite OSD and main OSD
A. Settings within main OSD have linkage with Smart Image OSD.
i.
Brightness
ii.
Contrast
iii.
Color Temperature
B. Because each preset profiles will define default setting of these 3 parameters. Users can understand
the value of that in preset profile by open the main OSD.
C. When any SmartImage Lite profile had been enabled. The parameters in main OSD are still available
for user to adjust. But these adjustments are temporary only. If users switch to another profile and
then go back. The setting in main OSD will show preset values of that SmartImage profile enabled.
Profile Definitions (system integrators to input at design stages)
A. Standard
i. Purpose: Default out of box settings, No optimization by SmartImage.
ii. Design:
1. This will follow user OSD setting. If any change by user, it will be saved. When switch back
from other SmartImage profiles, it will go back to last saved setting.
2. Default out of box settings
3. Same as OFF mode settings in SmartImage
