Meridian 2
97
2.2 Scanning frequencies
Hor.
: 30 - 83 K Hz
Ver.
: 56 - 76 Hz
Video dot rate
: <140 MHz
Power input
: 90-264 V AC, 50/60
r
2 Hz
Power consumption
:
<16.6W (typ.), < TBDW (max)
EPA 5.0 TBD WATT
Functions:
(1) D-SUB analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync
(2) (2) DVI digital Panel Link TMDS inputs
2.3 Ambient temperature: 0
q
C - 40
q
C
3. Electrical Characteristics
3.1 Interface signals
1). D-Sub Analog
Input signal
: Video, Hsync, Vsync
Video
: 0.7 Vp-p, input impedance, 75 ohm @DC
Sync.
: Separate sync TTL level, input impedance 2.2k ohm terminate
Hsync
Positive/Negative
Vsync Positive/Negative
Composite sync TTL level, input impedance 2.2k ohm terminate (Positive/Negative)
Sync on green video 0.3 Vp-p Negative (Video 0.7 Vp-p Positive)
2) DVI-D Digital
Input signal
: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+)
3) Audio
Input signal: 1000 mVrms
Loudspeaker (Impedance: 8 Ohm +/-15%): 1.5 W+1.5 W stereo for RMS Power
Frequency range: 450Hz - 20 KHz
3.2 Interface
3.2.1 D-Sub Cable
Length
: 1.8 M +/- 50 mm
Fix with monitor when packing, with transplant pin protective cover.
Connector type
: D-Sub male with DDC2B pin assignments.
Blue connector thumb-operated jack screws
Pin assignments:
PIN No.
Description
PIN No.
Description
1
Red
9
DDC +3.3V or +5V
2
Green/ SOG
10
Logic GND
3 Blue
11 Sense
(GND)
4 Sense
(GND)
12 Bi-directional
data
5
Cable Detect (GND)
13
H/H+V sync
6 Red
GND
14 V-sync
7 Green
GND
15 Data
clock
8 Blue
GND
