Philips 190E2FB/00 (AP), Service Manual

Page: 64 / 90

ʳʳʳʳʳ
ʳ
ʳ
0.1 190E2plus 19” Wide 16x10 LCD Monitor
2010/06/10 PHILIPS 13 of 30
64 190E2 LCD
General Product Specification
3.6 Power input connection
Power cord length : 1.5 M
Power cord type : 3 leads power cord with protective earth plug.
3.7 Power management (supplier to input)
The monitor must comply with the Microsoft On Now specification, and meet EPA
requirements.
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec.
time
Power-On On On active < 25W White LED --
Standby Off Off blanked < 0.8 W Blinking White LED
Period: 3sec On, 3sec
Off
< 3 s
DC Power
Off
N/A < 0.5 W LED Off
* Energy star report less than 33 watt
3.8 Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.9 Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
use DDC-2B, DDC/CI, and EDID V1.3
3.10 USB support
Connect the upstream port of the monitor to host PC’s USB port via USB cable,
Then attach external device to the downstream port of the monitor.
Check if the device can work properly.
3.11 DDC /CI Support
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be workable
with
Philps SmartManage lite, SmartControl II, and
Protrait Display Tune at least.