Philips 190E2FB/00 (AP) Service Manual Download Page 66

Page: 66 / 90

ʳʳʳʳʳ
ʳ
ʳ

0.1 190E2plus 19” Wide 16x10 LCD Monitor

2010/06/10 PHILIPS 15 of 30

190E2 LCD

General Product Specification

SmartImage Lite

Standard

Internet

Game

Default: Standard

3.16.2.1 Position

The position of the button is at the bottom center of the screen.

3.16.2.2 Smart Image Logo & Banner

As design to keep the LightFrame logo at header but change the name to “SmartImage Lite”

with bitmap format.

3.16.2.3 Icon of each profile

Each profile will use text instead of icon & text before.

3.16.2.4 User Operation Procedure

A. 3 different modes are switched to next in the sequence from 1 to 3 then back to 1 while

pressing this button: 1) Standard 2) Internet 3)Game. The default setting is ‘Standard”.

B. The FOS optimization will be changed in real time by which profile to be scrolled, users don’t

need to confirm to enable.

C. The SmartImage Lite OSD will remain on screen for 5 seconds after user last action. Or user

can also press [MENU] to close the Smart Image OSD immediately.

D. Except using [MENU] button to scroll down profile. If Smart Image OSD already launched

onscreen. User is allowed to use up/down key to choose profile and press [MENU] to confirm

selection and close the Smart Image OSD.

Summary of Contents for 190E2FB/00 (AP)



























































































Search results

Summary of Contents for 190E2FB/00 (AP)

Reviews:

Related manuals for 190E2FB/00 (AP)

Brands by name

Popular brands

Philips 190E2FB/00 (AP), Service Manual

Search results

Summary of Contents for 190E2FB/00 (AP)

Reviews:

Related manuals for 190E2FB/00 (AP)

Brands by name

Popular brands