9
H
OW TO
U
SE THE
S
OUND
A
DJUSTMENT
C
ONTROLS
T
o adjust your TV sound controls, select a channel and
follow these steps.
1
Press the MENU button
on the remote control
to show the onscreen menu. Picture will be high-
lighted.
2
Press the CURSOR DOWN button
to highlight
Sound.
3
Press the CURSOR RIGHT button
to enter the
sound menu.
4
Press the CURSOR UP or CURSOR DOWN
button
to select the sound adjustment you want
to change:
Equalizer, Balance, AVL, Dolby
Virtual, SAP,
or
Sound.
5
Press the CURSOR LEFT or CURSOR
RIGHT button
to adjust the selected control.
6
Press the STATUS/EXIT button
when finished
to remove the menu from the screen.
Equalizer
– adjusts the sound tones. Select
120Hz to 10KHz.
Balance
– adjusts the level of sound coming
from the left and right speakers.
AVL (Auto Volume Leveler)
- when On, AVL
will level out the sound being heard when sud-
den changes in volume occur during commer-
cial breaks or channel changes.
Dolby Virtual -
adds greater depth and dimen-
sion to TV sound. Select from Dolby Virtual
or Stereo sound (if Stereo) or Spatial or Mono
(if Mono).
SAP (Secondary Audio Programming)
– sent
as a third audio channel, a SAP signal can be
heard apart from the current TV program
sound. Note: If SAP is not available, “Not
Available” will appear on the screen.
Sound
– select from Stereo or Mono.
H
ELPFUL
H
INT
