Philips 150B1C/00 Servise Manual Download Page 7

Page: 7 / 78

150B LCD

Go to cover page

Forward

Back

OSD Attention Signals

The monitor will detect various display situation automatically. When the

monitor detects the problems, the screen will show the different warning

signals to remind you what is happen to your monitor.

This screen appears if there is no video signal input. Please check that

the signal cable is properly connected to the video card of PC.

NO VIDEO INPUT

After 30

minutes the attention signal of Entering Sleep Mode will replace it

automatically.

WAIT FOR AUTOMATIC ADJUSTMENT

This screen appears when you touch the

button. It will disappear

when the monitor is properly adjusted.

CANNOT DISPLAY THIS VIDEO MODE

This screen warns when the input frequency from the computer is not a

standard video mode or out of the monitor's scanning range. Please

change the display mode of the operating software in the computer (i.e.

Windows) to 1024 x768 @ 60Hz for best display performance.

ENTERING SLEEP MODE

This screen appears when the monitor is about to enter the sleep mode.

Please press any key on the keyboard or click the mouse to wake up

the monitor and computer.

Locked OSD function can be released by pressing

button for

more than 10 seconds. While press

button for OSD unlocked

purpose, the screen will keep showing "OSD MAIN MENU LOCKED "

until OSD function unlocked and screen automatically shows

following window for 3 seconds.

Switch ON/OFF attention signals

All attention signals can be switched off by keep pressing

button

for more than 10 seconds if there is no video signal supplied.

To Lock/Unlock OSD function

The OSD function can be locked by pressing

button for more than

10 seconds, the screen shows following windows for 3 seconds.

Every time when you press

button, this message appears

on the screen automatically. The

(brightness) ,

(mute) hotkey are still functional for brightness and mute expectively

while OSD locked

SERVICE MODE

SERIAL NO.: TY 123456

HOURS OF OPERATION: 000103

Recover attention signals by pressing

button for more than 10

seconds without video signal input.

Access Service Mode

Operating monitor with no signals (power saving mode), keep

pressing

button for more than 10 seconds. Following information

will appear on the screen. Leave service mode by either re-feed

video signal or simply turn off and on the power of monitor.

Summary of Contents for 150B1C/00















































































Search results

Summary of Contents for 150B1C/00

Reviews:

Related manuals for 150B1C/00

Brands by name

Popular brands

Philips 150B1C/00, Servise Manual

Search results

Summary of Contents for 150B1C/00

Reviews:

Related manuals for 150B1C/00

Brands by name

Popular brands