19
FTP
Settings -> Signage Display -> Server Settings -> FTP
Click the checkbox to enable/disable FTP server
feature. After enable, user can setup account,
password and port number.
a.
Account: The username for login FTP server. The
length of name in range 4~20 charters, and only
allow [a-z][A-Z][0-9].
b.
Password: The password for login FTP server.
Password length in range 6~20 charters, and
only allow [a-z][A-Z][0-9]. The password will
show “*” only after set up.
c.
Storage path: The FTP server will access internal
storage only. Cannot be changed by user.
d.
Port: The port number for FTP server. Available
port number range from 1025 to 65535, default
is 2121. The following port number cannot be
used:
8000 / 9988 / 15220 / 28123 / 28124 and SICP
network port (default 5000).
Remote Control
Settings -> Signage Display -> Server Settings ->
Remote Control
Click Enable checkbox to enable/disable remote
control client service, default is disabled. To use
remote control must bind device with remote control
server.
“Server” for user input remote control server URL
address (with https:// prefix). If device does not bind
with remote control server before, please input PIN
code provided by server.
Bind status:
(1)
When device does not have network,
showing “Network is disconnected”.
(2)
If device has network, but not connected
with remote control server, showing
“Server is disconnected”.
(3)
If server is connected but not bind with
server, showing “Server is unbinded”.
(4)
If device bind with server successfully,
showing “Server is binded”.
(5)
If PIN code is not correctly, showing “Error
PIN code”.
SNMP
Settings -> Signage Display -> Server Settings -> SNMP
Click Enable checkbox to enable/disable SNMP
service, default is disabled.
ADB Over Network
Se
ttings -> Signage Display -> Server Settings -> ADB
Over Network
Click Enable checkbox to enable/disable ADB over
network, default is disabled. The switch of ADB Over
Network is grayed out if you disable the “USB
Debugging” option on the Settings
-
>
Developer
options.
5.3.4.3 Source Settings
Settings -> Signage Display -> Source Settings
User can configure source APK’s detail options.
Media Player
Open Media Player APK’s edit play list activity and edit
effect stings activity.
Browser
Open Browser APK’s bookmark editor activity.
CMND & Play
CMND & Play APK settings activity
