Philips 107H Electronic User'S Manual Download Page 10

Page: 10 / 112

107H Product Information

Physical Specifications

• Dimensions

15.6" x 15.1" x 16.7" / 397 x 383 x 424 mm (including base)

15.6" x 13.1" x 16.7" / 397 x 333 x 424 mm (excluding base)

• Weight

15.0 kg

• Power supply

100-240 VAC, 60-50Hz
(Please refer to rating label)

• Temperature (operating)

0° to 40°C / 32° to 104°F

• Temperature (storage)

-25° to +65°C / -13° to +149°F

• Relative humidity(storage)

5% to 95%

* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300

, full white pattern.

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Pin Assignment

The 15-pin D-sub connector (male) of the signal cable (IBM systems):

file:///D|/EDFU/crt_17_6/edoc/english/107H/PRODUCT/PRODUCT.HTM (5 of 6)2005-04-08 ¤W¤È 11:25:56

Summary of Contents for 107H

















































































































Search results

Summary of Contents for 107H

Reviews:

Related manuals for 107H

Brands by name

Popular brands

Philips 107H, Electronic User'S Manual

Search results

Summary of Contents for 107H

Reviews:

Related manuals for 107H

Brands by name

Popular brands